A person in white gloves examines an electric bolt lock with a magnifying glass on a dark mat, beside a key, checklist, pen and a Procurement sign, with a factory and text in the background.
Electric Bolt Lock Manufacturers: 5 Suppliers Buyers Can Compare
November 10, 2026
A silver electric strike rests on a metal workbench beside digital calipers and a blue tray of white gloves, with a factory background and banner text reading Electric Strike Manufacturers: How Buyers Can Compare.
Electric Strike Manufacturers: How Buyers Can Compare Suppliers
November 11, 2026

Electric Strike for a Mortise Lock: Compatibility Checks Before Ordering

November 10, 2026

Quick Answer

An electric strike for a mortise lock fits when the latch, faceplate, frame cutout, and release logic all match the opening. Measure the existing strike and lock, confirm whether the deadbolt must retract electronically, and tie voltage and documents to the exact model. OUBAO’s long-plate OB-SK22 is a practical starting point for frames that need a longer faceplate, but the opening measurements decide the final configuration. That sequence keeps a low-cost strike from becoming an expensive site problem.

Why Is Fit the First Thing to Check?

A mortise lock is a lock body set into the edge of a door leaf. Its spring latch and, on many models, its deadbolt extend from the door edge into a strike on the frame. The electric strike replaces the fixed frame strike. It releases the latch electronically; it does not replace the mortise lock body, handle, cylinder, or key.

That distinction matters at quotation stage. A buyer is not simply ordering a frame-mounted release. The strike has to sit in the existing frame preparation, receive the latch at the correct height, and hold the door without binding. A model that looks close in a photo can still fail on screw spacing or pocket depth. OUBAO’s electric strike range includes long-plate, long-frame, and L-shaped formats alongside other electric strike models, which is useful when the frame preparation is already fixed.

For a new door package, the lock and strike should be selected together. For a retrofit, the existing frame and lock are the fixed side of the equation, so measure them before comparing models. That is the main difference between buying a strike for a project and buying one for stock. A distributor may carry several frame formats, while a project buyer usually needs one format to fit a known opening.

Identify the Lock and Latch Geometry

Start with the lock, not the strike catalog. Photograph the door edge with the lock face visible, the latch projecting from the door, and the existing strike plate. Put a ruler in each photo. Record the lock model reference if it is printed on the faceplate, then measure the latch and the frame opening.

The useful measurements are:

  • Latch type: spring latch only, deadbolt only, or both.
  • Latch projection: how far the latch extends beyond the door edge.
  • Latch face shape: square, round, beveled, or another profile.
  • Latch center height from the floor.
  • Lock faceplate length and width on the door edge.
  • Backset: the distance from the door edge to the center of the handle or cylinder.
  • Door thickness and handing: which way the door swings and how the latch bevel faces the frame.

These details tell a supplier which electric strike for a mortise lock can receive the latch and where it must sit. A photo alone is not enough because scale is lost. A measurement sheet with a photo is far more useful, especially when the buyer cannot send the original lock.

Latch Only vs Latch and Deadbolt

A spring latch is the angled bolt that clicks into the strike when the door closes. A deadbolt is the square bolt that is usually thrown with a key or thumbturn. Many mortise locks contain both in one lock body, but they do not necessarily move together.

For buying, decide which bolt the electric strike must release. If the access system only needs to release the spring latch, the deadbolt may remain a manual security bolt used when the building is closed. If the deadbolt must retract on every valid credential, the strike needs an opening and keeper arrangement (the pocket that receives the bolt) able to accept and release it. That is the practical meaning of an electric strike with deadbolt capability: the strike is selected for both bolts, not just the latch.

Write this requirement into the inquiry. “Mortise lock with latch and deadbolt; deadbolt manual only” produces a different shortlist from “both bolts released by access control.”

Why the Faceplate Length Is Not Enough

A longer faceplate can cover a longer frame preparation, which is why long-plate models exist. Length alone does not establish fit. The width, corner shape, screw-hole centers, cutout behind the plate, and frame reveal all have to match. Two plates can be the same length and still have different fixing points.

Use the existing plate as a template. Trace its outline, mark the screw holes, and measure the cutout behind it. If the frame has been repaired or the old plate was oversized, note that too. The new strike has to cover the preparation and leave clean edges, not just span the opening.

Brushed metal electric strike with a black body below the heading Mortise Lock + Electric Strike, followed by four panels for latch and deadbolt, faceplate and screw centres, frame cutout and depth, and voltage and release mode, above a red banner reading Confirm fit with the exact lock and frame.

Frame and Cutout Measurements

Measure the frame as carefully as the lock. The strike sits in the frame, so the available pocket controls which models can be installed without reworking the door or frame.

Record:

  1. Faceplate length and width.
  2. Screw-hole spacing, measured center to center.
  3. Cutout height, width, and depth.
  4. Latch centerline height from the finished floor.
  5. Door-to-frame gap at the latch side, top, and bottom.
  6. Frame material, thickness, and reveal: how far the frame sits back from the door face.
  7. Whether the frame is hollow metal, wood, aluminum, or another construction.

The door gap deserves special attention. A strike that fits the cutout but leaves the latch loose or rubbing will create callbacks. Check the gap with the door closed and latched, not while it is held open.

Handing matters too. A pair of doors, a reverse-bevel latch, or an unusual frame profile can change the installation. Include a photo of the full opening, not only the lock close-up. If the project has several door types, give each opening its own line in the schedule. Mixing measurements from two doors is a common source of wrong orders.

How Do You Confirm Deadbolt Compatibility?

Confirm deadbolt compatibility by deciding what the deadbolt does in daily operation. Ask three questions: Is the deadbolt thrown when the door is closed? Must it retract for every valid credential? Does the project require the strike to monitor or release it?

If the deadbolt is used only at night and the daytime access control releases the latch, the strike can be selected around the latch. The deadbolt remains a separate manual lock. The door schedule should say so, because installers otherwise assume the strike controls every bolt.

If the deadbolt must release electronically, the strike opening, keeper, and release action need to accept both bolts. This is a different product requirement from a latch-only strike, even when both fit the same frame height. An electric strike with deadbolt release should be quoted with the lock geometry, not chosen from a faceplate photo.

If the deadbolt is motor-driven or separate from the mortise lock, treat it as another locking device. An electric bolt lock may be the better fit for that function, while the strike handles the latch. The difference between magnetic locks and electric strikes is useful when the project is still comparing lock types.

Electromagnetic Door Locks: Magnetic vs Electric Strikes
  • Magnetic locks use electromagnetic force to secure a door and release it when power is removed. Electric strikes work with a mechanical latch and can be fail-safe or fail-secure.
Read Article
Text reading Magnetic Lock vs Electric Strike between a glass door with a top lock and a dark framed door with a metal strike plate, in a bright lobby.

OB-SK22 is a long-plate electric strike designed for frame preparations that need a longer faceplate. Use it as the starting point when the frame preparation calls for that plate format, then match the latch opening and fixing pattern to the actual lock. The product choice follows the survey, not the other way around.

OB-SK22 Long-Plate Electric Strike Lock
  • Working voltage — OB-SK22: 12VDC(24VDC upon request) Working current — OB-SK22: Fail safe is 250mA, Fail secure is 650mA
View Product
A silver rectangular electric strike plate with screw holes and a black mechanism, shown on a white background.

Never let “deadbolt” remain a one-word line in the RFQ. State whether it is manual, key-operated, thumbturn-operated, or required to release with access control.

Voltage and Documents to Confirm

Put the electrical requirement on the same specification sheet as the door hardware. The strike, controller, power supply, and exit release form one circuit, so a voltage that suits the controller may not suit the strike at the door.

OB-SK20 operates on 12 V DC, with 24 V DC available on request, and comes in fail-safe and fail-secure configurations. The long-plate OB-SK22 operates on 12 V DC as well, with 24 V DC available on request and the same fail-safe or fail-secure choice. Put the selected voltage and release behavior on the quotation drawing so the controller, power supply, and strike are ordered as one system.

The RFQ should state:

  • Supply voltage available at the door.
  • Required fail-safe or fail-secure behavior.
  • Controller output type and release duration.
  • Whether a latch-status or door-status signal is needed.
  • Cable distance from the power supply to the strike.
  • Exit button, break-glass, or fire-alarm release arrangement.
  • Any document required for the destination market.

Fail-safe means the strike releases when power is removed. Fail-secure means it stays locked when power is removed and releases when powered. The choice affects how the door behaves during an outage and how the exit route is arranged. It is a project decision, not a default.

Documentation should follow the exact model and order configuration. Ask for the dimension drawing, cutout template, installation instructions, and datasheet together, and keep the revision with the purchase order. The download page is the place to start for available technical files. A drawing revision that matches the quotation is more useful than a generic catalog page.

What Order Details Prevent a Wrong Fit?

A complete opening schedule prevents most fit problems. For an electric strike for a mortise lock, one missing dimension can turn a simple order into a site visit. Send one line for each door rather than a single example, especially when a project has double doors, different frame types, or mixed lock sets.

Include:

  • Door type, material, leaf width, and weight.
  • Single or double leaf, and handing.
  • Lock reference and photos of the lock face, latch, and existing strike.
  • Faceplate dimensions, screw centers, cutout dimensions, and frame depth.
  • Latch and deadbolt arrangement, including which bolt the strike must release.
  • Voltage, fail-safe or fail-secure requirement, and signal requirement.
  • Finish, branding, and packaging needs for the resale or project order.
  • Target market, required documents, quantity, and required delivery date.

This is also where an OEM/ODM discussion belongs. OUBAO manufactures door-control hardware in China and can review model configuration, branding, and packaging with the buyer. A clear opening schedule lets that discussion focus on the few models that can actually fit, instead of a long list of near matches. Buyers who send a marked-up drawing usually get a faster, more accurate response than those who send only a product name.

Final Thoughts / Next Step

An electric strike for a mortise lock is a fit-critical purchase. The lock body, latch, deadbolt, faceplate, and frame cutout set the limits; the electrical release and documents confirm the order configuration. Measure the existing opening, mark which bolt the strike must release, and put the results in the RFQ.

OUBAO’s OB-SK22 is the long-plate starting point when the frame needs a longer faceplate, and the wider OB-SK range gives buyers other frame formats to compare. Send the door type, door weight and width, installation method, target market, required documents, and quantity to OUBAO so the team can confirm the configuration and quote. If a detail is still unclear, the FAQ is a useful first check before the opening schedule is issued.

Hi, welcome to OUBAO.
This article comes from the OUBAO Team, drawing on our long experience in door control hardware and real-world manufacturing projects. We hope the information below gives you a clearer and more practical way to look at this topic.
Exploring a specific project or have a question along the way? We’d be happy to share our thoughts.
OUBAO door control manufacturer

Share This Page

Get a Quote

    Related Posts

    There are no posts on the list.
    ✕

      Find the right door control solution.

      Looking for door closers or magnetic locks for your product range? Tell us what you need, and our team can help with product options, OEM/ODM requirements and supporting documents.

      ProductsDoor closers & magnetic locks

      ServicesOEM & ODM

      CertificatesUL, CE, ANSI, EN 1154, EN 1634

      Send an inquiry