Quick Answer
Electric strike manufacturers differ less in headline price than in range depth, production control, documentation, and OEM/ODM support. Compare them on four points: whether the strike fits your door and frame, which exact models carry the certification your market accepts, how consistently the factory builds and tests them, and how clearly it quotes options. OUBAO produces seven electric strike models alongside door closers and magnetic locks, controls casting, machining, and assembly in-house, and supports private-label programs, which shortens the path from sample to repeat order.
Why Do Quotes from Electric Strike Manufacturers Differ So Much?
Two quotes for the “same” strike often describe different products. One may include a stainless faceplate, monitoring contacts, branded packaging, and a certificate copy; the other may be a basic unit in a plain carton. Before treating a gap as a pricing advantage, line up the bill of materials, voltage, mode, finish, packaging, and delivery terms side by side.
Ask each supplier to quote by line item rather than as a single unit price. A clear quote separates the strike, any options, tooling or setup, packaging, samples, and freight. That structure makes it obvious when a low offer is simply a smaller scope, or when a higher offer includes work you would otherwise pay for later.
Manufacturer vs Trading Supplier
The practical difference is who controls the details you may need to change. A manufacturer can adjust a faceplate, coil configuration, finish, or label and explain the effect on fit and lead time. A trading supplier has to relay those questions to someone else, which slows samples and makes repeat orders less predictable.
Look for production steps you can verify: tooling and die casting, CNC machining, assembly, and functional testing. OUBAO runs these stages through its manufacturing process at a 106,000 m² production base, alongside mold development and oil filling for its door closer lines. The company makes door closers, magnetic locks, electric strikes, electric bolts, exit devices, access controllers, and swing operators, so a question about one component reaches the team that builds it.
Most electric strike manufacturers can send a catalogue; fewer can explain why one faceplate suits a frame and another does not. That answer is the difference between a supplier and a production partner. Trading suppliers still have a place in small mixed orders or when a brand is testing a new market, but the risk grows when you need consistency across repeat shipments, custom branding, or a model change that depends on production knowledge.
Four Filters for Comparing Brands
Shortlist by fit and evidence first, then price. Electric strike brands can look almost identical in a catalogue because the differences that matter sit in dimensions, electrical behavior, and documentation.
Use four filters:
- Door and frame fit. Faceplate length, width, depth, cutout, and mounting position decide whether the strike installs cleanly or needs frame modification.
- Electrical fit. Confirm 12 VDC or 24 VDC, fail-safe or fail-secure operation, monitoring contacts, and current draw before specifying a power supply.
- Market evidence. Match the certificate and test report to the exact model, not to the brand name.
- Supply fit. Check how many models cover your door schedule, what the MOQ is per model, and whether branding and packaging can be repeated consistently.

A supplier that scores well on all four is easier to keep than one that wins only on unit price. The cheapest unit can become the most expensive choice when it arrives with the wrong faceplate or without the document your customer needs.
Which Product Range Shows Whether a Supplier Understands Your Market?
Range breadth is a quick signal. Electric strike manufacturers that offer only one or two faceplates tend to ask you to adapt the door; a broader range lets you choose the model that fits the frame, door load, and security requirement.
OUBAO’s full electric strike range covers seven models. All use 12 VDC as standard, with 24 VDC available on request, and all are rated for −20°C to 50°C.
| Model | Faceplate (mm) | Static strength | Typical fit |
|---|---|---|---|
| OB-SK20 | 150 × 28 × 34 | 350 kg | Standard commercial frame |
| OB-SK21 | 150 × 40 × 34 | 350 kg | Wider faceplate |
| OB-SK22 | 200 × 40 × 34 | 350 kg | Extended faceplate |
| OB-SK23 | 250 × 25 × 34 | 350 kg | Narrow, long frame |
| OB-SK23C | 250 × 25 × 31.6 | 300 kg | Narrow profile, fail-secure only |
| OB-SK24 | 150 × 37 × 34 | 350 kg | L-shaped, limited space |
| OB-SK25 | 124 × 43 × 32 | 1,000 kg | Compact opening, high strength |
The OB-SK20 standard electric strike suits common commercial frames and is a sensible starting point for a general range. The OB-SK23C narrow-profile fail-secure strike fits narrow frame profiles where a standard faceplate will not sit flush, and it is supplied in fail-secure mode only. The OB-SK25 compact high-strength strike handles higher door loads in a smaller opening.
- Working voltage — OB-SK20: 12VDC(24VDC upon request) Working current — OB-SK20: Fail safe is 250mA, Fail secure is 650mA

That spread matters to distributors and project buyers because one supplier can cover several door schedules without adding a second vendor. It also makes replacement orders easier to specify: you match the faceplate and mode, not just the brand.
The electrical difference within the range matters. Fail-safe models unlock when power is removed; fail-secure models stay locked. The OB-SK23C is fail-secure only, while the other six can be ordered in either mode, with a signal-output version available. Fail-safe coils draw 250 mA and fail-secure coils 650 mA, except the OB-SK23C at 900 mA.
Certification and Test Evidence to Request
Request the certificate for the exact model you intend to order, then check three things: the model number on the certificate matches the product label, the standard and issuing body are named, and the test report covers the configuration you are buying. Ask for the model-level certificate a tender reviewer will expect, rather than a document that covers a family of products.
All seven OB-SK electric strike models carry CE certification. Match the certificate number to the model and voltage variant on your purchase order and file a copy with the commercial documents. If your project specifies UL or another approval scheme, raise it at the RFQ stage; a supplier that does not hold the relevant listing should tell you before the product is written into a tender.
Static strength is worth checking at the same time. Five models in the range are rated at 350 kg, the OB-SK23C at 300 kg, and the OB-SK25 at 1,000 kg. That figure describes tested holding capacity under stated conditions, so compare it with the door load and traffic in your project rather than treating it as a fit-all number.
How Do You Compare Build Quality Without Visiting the Factory?
Start with two samples from different production runs if volume justifies it. Check the faceplate thickness and finish, look for sharp edges or uneven casting, and cycle the strike repeatedly to listen for changes in sound and feel. Measure the mounting holes and faceplate against the drawing, because small deviations become installation problems on site. Then ask how the supplier traces a unit back to its production lot.
Electric strike manufacturers that control their own process can usually answer with specifics: incoming material checks, in-process inspection, functional testing, and lot records. OUBAO uses 6S management and MES traceability across its quality control workflow, tests incoming materials and finished units, and runs laboratory checks in a CNAS-accredited facility. The company operates 9 die-casting machines, 100 CNC machines, and 25 robotic arms, which supports consistent dimensions across repeat orders.
If a supplier cannot explain what happens between casting and packing, treat that as a gap. You are buying repeatability as much as the sample in your hand.
What Should You Check in OEM/ODM and Private-Label Support?
Customization is only useful when it survives production. Confirm which elements can carry your brand—product label, faceplate, packaging, manual, and carton—and which are fixed by the model. Ask for a written list of options, a sample timeline, and the point at which changes trigger new tooling or a new MOQ.
OUBAO’s OEM/ODM program covers custom configuration, branding, and packaging, following an RFQ, prototype, standards confirmation, and mass production sequence. That order suits buyers who need a private-label line but cannot absorb a long development cycle: the model is selected first, then branding and packaging are settled against a known product.
Ask for MOQ by model, finish, and packaging rather than accepting one blanket figure. A supplier that gives the same number for every configuration is probably simplifying the answer.
How Should You Compare Samples, Lead Times, and Payment Terms?
Make every supplier quote against the same schedule. Ask whether the sample comes from the production line, whether the sample cost is credited against the order, and what the sample lead time includes. For production, confirm when the clock starts—purchase order, deposit, artwork approval, or certificate confirmation—and ask for the milestones in writing.
Payment terms, Incoterms, currency, and packaging belong in the same comparison table as the unit price. So does the handling of damaged units, spare parts, and documentation. When you compare electric strike manufacturers on this basis, a quote that looked higher often turns out to include work the cheaper one left out.
Electric Strike RFQ Checklist
A short, specific brief gets a usable quote. Include:
- Door type and material: hollow metal, wood, aluminum, or glass.
- Door leaf weight and width.
- Frame profile and cutout dimensions, or a photo and drawing.
- Installation method: new mortise cutout, surface mount, or replacement of an existing strike.
- Supply voltage and available power.
- Mode: fail-safe or fail-secure, plus any monitoring requirement.
- Finish and faceplate size.
- Target market and required documents.
- Branding, packaging, and manual language.
- First-order and annual quantity, plus your sample deadline.
Fail-safe and fail-secure are the two terms buyers most often mix up. Fail-safe means the strike releases when power is lost, which supports free egress; fail-secure means it stays locked without power, which protects the opening. The choice belongs in the RFQ, not in a follow-up email after the order.
Electric strike manufacturers can quote faster when the brief includes the door schedule rather than a model number alone. That also lets the supplier flag a faceplate or voltage mismatch before a sample is built.
Final Thoughts / Next Step
The right electric strike manufacturer is the one whose range fits your doors, whose documents match your market, and whose production you can verify. Price is the fourth question, not the first. A supplier that answers all four clearly will usually cost less over a repeat order than one that wins on the first quote alone.
Send OUBAO your door type, door weight and width, installation method, target market, required documents, and quantity. The team can match the request to the range and quote the model, options, and packaging in one response. Send your requirements to start the comparison.



