Silver panic bar hardware for double doors shown on a reflective floor, with bold white and red text reading Panic Bars for Double Doors: What Buyers Must Check.
Panic Bars for Double Doors: What Buyers Must Check Before Ordering
November 13, 2026
A brushed-metal electric strike mounted on a dark door frame, with the headline What Is an Electric Strike? A Buyer's Compatibility Guide.
What Is an Electric Strike? A Buyer’s Guide to Door Compatibility
November 15, 2026

What Is a Rim Exit Device? A Guide for Hardware Buyers

November 14, 2026

Quick Answer

A rim exit device is a surface-mounted push bar that releases a single door in the egress direction. The bar body sits on the face of the door leaf, and its latch engages a strike on the frame. Buyers choose it when a direct, one-motion release suits a single-leaf opening. Confirm door width, frame type, latch and strike position, outside trim, and the documents your market requires. OUBAO’s DK350 offers a one-point, non-handed starting point in painted steel or SS304.

What Is a Rim Exit Device in Plain Terms?

A rim exit device is an exit bar mounted on the face, or “rim,” of the door leaf rather than inside it. Pressing the bar retracts a latch at the end of the assembly, and the latch releases from a strike fixed to the frame. The device is an egress release first; the locking function depends on the latch, strike, and outside trim you specify.

Buyers also call it a panic bar or push bar. The names describe the same idea: one push opens the door in the direction people travel to leave. “Rim” tells you how it mounts. The mechanism is visible on the door face, so installation does not require a deep pocket cut into the leaf. That is why buyers often describe the same product simply as a panic bar for a single door.

For a distributor, that mounting style affects stock, installation labor, and service calls. A surface-mounted bar is easier to inspect and replace than hardware buried in the door. It also projects from the face, so check handle clearance, wall clearance, and any door stop that could interfere.

OUBAO’s panic exit device range includes horizontal bar, touch bar, and vertical rod types, which helps buyers compare mounting styles before settling on a model.

How the Device Releases the Door

It releases the door with one push on the bar. The bar moves a linkage that pulls back the latch, the latch clears the frame strike, and the door swings free. When the door closes, the latch returns to the strike and holds the door again without anyone turning a handle.

The buying point is the travel path. The bar, linkage, latch, and strike have to line up through the full swing. A device that releases on the bench can still drag if the strike is set too deep, the door sags, or the frame is out of square. That is why the installation conditions belong in the quotation, not just the model number.

Inside the building, the bar releases without a key, card, or special knowledge. Outside access is a separate decision. If the project needs key entry, a lever, or an access-control release on the outside face, specify the outside trim with the device rather than assuming it is included.

Handing is another stock question. The DK350 is non-handed, so one version fits left- and right-hand doors. For a distributor, that can simplify inventory and reduce the risk of shipping the wrong hand.

Door and Frame Conditions That Matter

Start with the leaf and frame, not the bar. A rim exit device suits a single door where the latch can engage the frame on the strike side. The door face needs enough flat area for the bar body, and the frame needs a sound mounting point for the strike.

Check these conditions before you compare models:

  • Door material and thickness, including any core or facing that may not hold fasteners well.
  • Frame type and condition, especially the strike area and its reinforcement.
  • Door width and clear opening, checked against the bar length and the space needed at each end.
  • Door swing and egress direction, so the bar sits on the push face.
  • Outside trim, closer, door stop, and any access-control hardware that could interfere.

Door compatibility for an exit device comes down to those checks, not a single measurement. The DK350 uses a standard 900 mm bar. That dimension is a starting point for the model, not a statement that every door within a range will fit. Confirm the actual leaf width, the bar position, and the latch engagement on the project door.

Buyer checks graphic showing a rim exit device above four panels for door width and face, frame and strike, outside trim, and finish and documents, with a note to confirm the opening before ordering.

A door closer also belongs in the same check. A closer that pulls the door shut before the latch clears the strike will create callbacks. This guide to closers on commercial doors explains why the two pieces of hardware have to work as one opening.

For double-leaf openings, each leaf needs its own release hardware, and the pair may need extra parts to seal the gap and sequence the leaves. OUBAO’s 1710S/1710P is one model to review with the team when the opening has two leaves.

Latch, Strike, and Trim Configurations

The latch is the moving bolt that holds the door closed. On a rim device, it sits at the end of the bar assembly and projects into the frame strike. The strike is the fixed keeper on the frame that receives and holds that latch. If either part is wrong, the bar may feel fine but the door will not stay closed or release cleanly.

Outside trim controls what someone can do from the other side. A pull-only trim keeps the outside face simple. A lever or cylinder trim adds keyed entry. An access-control release adds another layer. Decide this early, because trim changes the door preparation, the parts list, and the price.

Finish and material are buying decisions too. The DK350 comes as the DK-350P in painted steel and the DK-350S in SS304 stainless steel. Match the version to the project’s finish schedule, cleaning routine, and exposure rather than choosing on appearance alone.

The DK350 also has a lateral lock point — a locking point at the side of the opening — and a stainless steel latch. When you compare quotes, ask for the exact variant, bar length, trim, and strike so two suppliers are pricing the same assembly. OUBAO’s FAQ page is a useful place to confirm what information the team needs for a configuration check.

When Is a Rim Exit Device the Wrong Choice?

It is the wrong choice when the opening needs more than one latch point, when the frame cannot take a strike, or when the door face cannot accept a surface-mounted bar. It is also a poor fit when the design calls for concealed hardware or when the opening is a pair of doors that needs coordinated release across both leaves.

The clearest alternative is a vertical rod device. It latches at the top and bottom of the door instead of at one side point. That suits openings where two locking points are required, including some double-door and tall-door arrangements. OUBAO’s 1720S/1720P is a two-point vertical type, so it belongs in a different comparison from a single-point rim bar.

1720S/1720P – Two Points Locking Vertical Type Panic Bar
  • Material — 1720S: SUS304 Body Material — 1720P: Aluminum alloy cover, Steel Body, SS tube
View Product
Silver metal rim exit device with a long horizontal push bar and two curved end brackets.

A rim device can also be the wrong starting point when the project’s approval depends on a specific fire-rated assembly. In that case, the device, door, frame, and closing hardware are reviewed together. Ask for the model-level document that matches the complete opening, not just a bar that looks similar.

Rim Device vs Vertical Rod: A Quick Buyer Check

QuestionRim exit deviceVertical rod device
Locking pointsOne latch at the frame strikeTop and bottom latches
Typical starting pointSingle-leaf egress doorOpening that needs two-point locking
MountingBar body on the door faceBar with rods running up and down the leaf
Main checkStrike position and bar clearanceRod alignment, floor and header conditions

Use the table to frame the conversation, then confirm the actual door and frame with the supplier.

Which OUBAO Model Fits a Single-Door Egress Opening?

The DK350 is the model to start with when a single-point horizontal bar suits the door. It is a one-point crossbar device with a non-handed design, a standard 900 mm bar, a lateral lock point, and a stainless steel latch. Buyers can choose the DK-350P in painted steel or the DK-350S in SS304.

That combination covers a straightforward single-door brief: one release point at the frame, a bar that works on left- or right-hand leaves, and two common finish directions for a resale range. It does not replace a door survey. The leaf width, frame strike, outside trim, closer, and target-market documents still decide whether the assembly is right.

DK350 – Push Bar Panic Exit Device
  • Stainless Steel material, Esthetical design Slight pressure on device touch bar will retract latch for immediate exit
View Product
Silver metal rim exit device with a long horizontal push bar between two rounded mounting ends.

OUBAO is a China-based manufacturer of door closers, magnetic locks, and related door-control hardware. For private-label or project orders, the team can discuss model configuration, branding, packaging, and the documents your market asks for. The DK350 product page gives the model details to compare against your door schedule.

Quote Request Checklist

Send the door and frame details first, then the commercial requirements. A clear brief lets the supplier confirm the bar length, latch and strike arrangement, trim, finish, and documentation without a round of guesses.

Include:

  • Door type, material, single or double leaf, width, height, thickness, and estimated weight.
  • Frame type and photos of the strike area, hinge side, and door face.
  • Egress direction and swing, plus any closer, stop, or access-control hardware already specified.
  • Outside trim requirement: pull only, keyed entry, lever, or electronic release.
  • Preferred material and finish, such as painted steel or SS304.
  • Target market, required certificate or test document, and any project submittal format.
  • Estimated quantity, target shipment date, and OEM/ODM needs such as branding or packaging.

Photos with a tape measure in frame are more useful than a description alone. If the opening is part of a larger door schedule, send the schedule so the exit devices, closers, and access control can be checked together.

Final Thoughts / Next Step

A rim exit device is a surface-mounted push bar for a single-leaf egress door. It releases the latch with one push, and its suitability depends on the door face, frame strike, bar length, trim, and the complete opening. Choose it for a direct one-point release, and move to a vertical rod or another type when the door needs two locking points.

For a DK350 recommendation, send OUBAO the door type, leaf width and weight, installation photos or mounting details, target market, required documents, and estimated quantity through the contact page. The team can confirm the variant and configuration, then quote.

Hi, welcome to OUBAO.
This article comes from the OUBAO Team, drawing on our long experience in door control hardware and real-world manufacturing projects. We hope the information below gives you a clearer and more practical way to look at this topic.
Exploring a specific project or have a question along the way? We’d be happy to share our thoughts.
OUBAO door control manufacturer

Share This Page

Get a Quote

    Related Posts

    There are no posts on the list.
    ✕

      Find the right door control solution.

      Looking for door closers or magnetic locks for your product range? Tell us what you need, and our team can help with product options, OEM/ODM requirements and supporting documents.

      ProductsDoor closers & magnetic locks

      ServicesOEM & ODM

      CertificatesUL, CE, ANSI, EN 1154, EN 1634

      Send an inquiry