Quick Answer
Door closers normally fall under HS heading 8302, with six-digit subheading 8302.60 covering automatic door closers and their parts. The final door closer HS code still depends on the exact product, construction, components and destination, so confirm it with a customs broker before shipping. OUBAO helps buyers prepare that check by matching the quotation to the exact model, mounting configuration and available product and certification documents. That distinction affects tariff treatment, documentation and landed-cost planning.
What Door Closer HS Code Applies to Your Product?
Start with 8302.60, then confirm the full national code. The Harmonized System (HS) is the international product classification system used by customs authorities. Its first six digits are aligned across participating countries. Heading 8302 covers base-metal mountings, fittings and similar articles for doors, windows and other fixtures. Subheading 8302.60 is the specific six-digit line for automatic door closers and parts.
For most commercial door closers, 8302.60 is the starting point. In tariff language, “automatic” generally describes a closer that returns the door without manual assistance, not a powered entrance operator. If the product includes a motor, control board or sensor, describe those features separately for your broker.
The six-digit code is the part most suppliers and brokers recognize. The full door closer HS code is longer because each country adds its own tariff digits. That is why two shipments of similar closers can show different full codes while sharing 8302.60.
Why Similar Door Closers Can Land in Different Codes
Classification follows product facts, not catalog labels. A hydraulic surface-mounted closer, a concealed closer, a cam-action unit and a floor spring may perform a similar job, but their construction and installation differ. Customs classification looks at what the item is, what it is made of, how it works and whether it is a complete unit or a part. Those differences can move a product to another national tariff line even when the six-digit subheading remains 8302.60.
Does Product Type and Mechanism Matter?
Yes. A complete mechanical closer with a base-metal body and arm is a different customs description from a powered operator with a motor and control system. A hold-open arm, back check or delay valve normally remains part of the closer’s function, but a separate accessory may need its own description.
Prepare a plain product description: model, function, operating mechanism, mounting method, body material, arm type and whether the item is sold as a complete set. A datasheet and drawing are more useful to a broker than a marketing name.
Does Material and Construction Matter?
Yes. Heading 8302 is built around base-metal articles. Cast iron, steel, aluminum and zinc bodies fit that description. If a closer uses a plastic body or a mix of materials, the classification may depend on the component that gives the product its essential character. Give the broker the material breakdown rather than assuming that every product called a door closer belongs in 8302.60.
Does the Door Closer HS Code Change for Spare Parts?
It can. A complete closer, a replacement arm, a mounting bracket and a cover may be described differently depending on the tariff schedule and whether the part is dedicated to a closer. The six-digit subheading includes parts for automatic door closers, but national rules can still require a separate statistical line or additional declaration.
If you ship installation kits, split shipments or spare arms with a closer order, list each item separately on the commercial invoice. Mixing a complete unit and loose parts under one vague description makes the entry harder to check.
Product Details to Confirm Before Asking a Broker
Build a short product file. It should answer five questions:
- What is the product: a complete closer, operator, part or kit?
- What does it do: manual closing, hold-open, back check, delay action or powered operation?
- What is it made of: body, arm, bracket and any non-metal components?
- How is it installed: surface, concealed, top jamb, parallel arm or floor-mounted?
- How is it packed: single unit, pair, set with accessories or spare-part carton?
Add the model number, drawing, photograph and destination. This file gives your broker the facts behind the door closer HS code; a generic “door hardware” label invites questions. If the same model is available in several arm or function versions, identify the exact version on the order.
For door selection, the door width and weight selection guide helps you match closer power to the leaf before you finalize the product description. That choice affects the model, not the six-digit subheading, but it keeps the invoice and technical file consistent.
- That is the whole method, and it prevents most site problems and returns. A door closer size chart matches three numbers: leaf width, leaf weight and power size.


How Does the Destination Change the Door Closer HS Code?
The destination determines the full code, duty treatment and documentary requirements. Every importing country starts with the international six-digit system, then adds national digits. The same closer can therefore have one full code in the United States, another in the European Union and another in the United Kingdom or Canada. Tariff rates, trade measures and origin rules also differ. Rates change, and the applicable rate depends on the full entry, not just the product name.
Give your broker the country of import, country of origin and the proposed full code. Country of origin is not the same as the country of export. A closer assembled in one country from parts made elsewhere may need an origin assessment before a preferential duty claim. Classification and origin are separate questions.
If you sell through distributors in several markets, keep a classification sheet for each destination rather than one global code. That prevents a warehouse or e-commerce team from copying a code from one market into another.
Shipping Documents That Must Match
The commercial invoice, packing list and transport document should tell the same story. Keep the door closer HS code and product description consistent across the commercial invoice, packing list, bill of lading or air waybill, and certificate of origin where one applies. Include the model, quantity, unit, gross and net weight, country of origin and the full code required by the destination. If the invoice says “door closer” but the packing list says “hardware set” or “spare parts,” the mismatch can delay clearance even when the code is correct.
Product certificates serve the project file and market approval process, while customs classification rests on the goods themselves. A UL listing, UL 10C classification or ANSI 156.4 grade document supports the buyer’s technical review; the broker still classifies the goods by their physical and functional facts. Keep both sets of documents, but use each for its proper purpose.
For fire-rated projects, the fire-rated door closer guide explains how the closer, arm and mounting arrangement work together. That information belongs in the submittal package and helps the buyer confirm that the model on the invoice matches the approved assembly.
How Does the Door Closer HS Code Affect Landed Cost?
A wrong code can cost more than duty. The full code influences the duty rate, taxes, statistical reporting and sometimes the need for an import licence or additional declaration. It also affects how quickly the entry clears. A lower unit price can lose its advantage when a misclassified shipment is held, reworked or delayed. It can also extend the effective lead time and tie up working capital.
Ask your supplier for the code used on previous shipments, but treat it as a reference. Check it against the current product and destination. Product changes matter: a new arm, a different body material or a switch from a complete closer to a spare-part kit can change the declaration.
Compare suppliers on the quality of their product file as well as price. A supplier who can provide a stable model description, material list, drawing, packing details and certificate scope helps your broker work faster. That reduces the risk of a last-minute code change and makes repeat orders easier to clear.
How OUBAO Prepares the Product File
A complete product file makes the door closer HS code easier to confirm. OUBAO manufactures door closers, magnetic locks and related door-control hardware in China, with surface-mounted and concealed closer options for commercial and residential projects. Buyers can compare models by door weight, mounting style and function through the door closer collection, including concealed door closer options for projects that need hidden hardware.
For heavy commercial doors, the OB03 heavy-duty cast iron door closer shows why model-level details matter. The series is surface-mounted and built around a cast iron cylinder for high-traffic use. OB03BC, OB03DA and OB03BCDA cover door leaf weights of 15–150 kg and widths of 750–1400 mm at power size 1–6. OB03T covers 150–220 kg and widths of 1400 mm or more at power size 8. Mounting options include standard, parallel, top jamb and slide arm, with functions such as back check, delay action and optional hold-open depending on the submodel.
Certification is submodel-specific. OB03BC is UL and UL 10C listed and meets ANSI 156.4 Grade 1. OB03DA and OB03BCDA are UL and UL 10C listed. When you request a quote, specify the submodel, arm and mounting so OUBAO can include the matching datasheet and certification documents for your file.
- The OB03 Series is designed for various door types, including wooden and metal doors. Yes, the OUBAO OB03 Series features a non-handed design.

For private-label or project orders, the OEM and ODM process covers finish, packaging, spring strength and configuration discussions. Share the target market and the documents your customer needs at the inquiry stage. That lets the quotation reflect the correct product version instead of a generic series description.
Final Thoughts / Next Step
The door closer HS code starts with 8302.60, but the entry code is a destination-specific decision. Confirm the product type, material, complete-versus-parts status and full national code before you ship. A consistent product file protects your landed cost and keeps repeat orders moving.
Send OUBAO the door type, door weight and width, mounting method, target market, required customs documentation and estimated quantity. The team can confirm a suitable model and prepare the product details your broker needs for a written quotation. For common order questions, see the FAQs.



